Guillotine EBA 4850

The EBA 4850 is a guillotine-type cutter for paper with a cut length of 475 mm, has a mechanical (manual) adjustment of the back position and an electric foot clamp and a knife clamp.

The EBA 4850 cutter can cut a stack of paper up to 70 mm thick. Cut length 475 mm allows using EBA 4850 to process printing products up to format SRA3 (320x450 mm) on the long side.

The EBA 4850 is a comfortable model among the EBA guillotines with a cutting length of 475 mm. Due to the electric pressure of the foot and the knife drive, the process of preparing and cutting paper is greatly accelerated and the requirements for the physical capabilities of the cutter are simplified.

Country of manufacture: Germany.

Mechanical adjustment of the backstop position is carried out using the handle on the front panel of the cutter and allows for coarse and fine adjustment of the position.

Mechanical pressure of the foot is carried out with the help of a spindle on the upper surface of the knife drive mechanism.

Security features and safety measures EBA 4850:

- for cutting, the operator must press simultaneously two buttons in opposite sides of the panel, which prevents the hand from falling under the knife during the cutting process;

- front plastic transparent cover for the working space with a mechanical interlock during operation.

- rear transparent protective screen.

- safe replacement of the knife using the original device for removing the knife;

- safe change of cutting stick from the side without removing the protective cover;

- the lock of inclusion of the engine with a key.

The EBA 4850 is available on the desktop. We recommend using the options (not included in the basic package): the original table-stand or stand for the EBA 4850. The original table-stand, as well as the stand, allows you to place the EBA 4850 cutter in any place convenient for you in the room. A shelf in this option allows you to place accessories or paper.

Guillotine EBA 4850 is a comfortable and low-cost solution for digital printing houses, offices, print shops and other enterprises where processing of small print runs of printing products up to the SRA3 format (320x450 mm) is carried out.